Woofer joinery details

Drilling face holes
Drilling face holes
... and edges
… and edges
Srew to top and deepen

A few photos of construction details.

Apart from those anchoring the V-frames to the sides, screws were used only in hidden areas, namely the filler behind the front flap and the lower V-frame joint with the bottom.

 

Drilling dowels on the spacer
Drilling dowels on the spacer

 

Drilling dowels for the upper V-frame mitre joint.

 

 

 

V-frame in position
V-frame in position
Lower V-frame joint detail
Lower V-frame joint detail

Setting out V-frame and bottom mitre joint. I drilled a 5-dowel joint between upper and lower V-frame elements.

 

 

 

Second side dry fit
Second side dry fit
Marking side dowels
Marking side dowels

Fitting “top” side before marking out V-frame dowel positions.

 

 

 

Final dowel mark-up
Final dowel mark-up
Perfect fit!
Perfect fit!

Squaring across marks and centring at 9mm.